Header Ads Widget

types of motherboard

Different Types of Motherboard In Computer

Motherboards are considered to be the heart of every computer you use. This is mainly because they contain important components like memory and CPU (central processing unit). It also serves as a connector to other important components within the computer.

▪ AT Motherboard

▪ ATX Motherboard

▪ LPX Motherboard

▪ BTX Motherboard

▪ Pico BTX Motherboard

▪ Mini ITX Motherboard

different types of motherboard

To understand computers and be able to design your personal computer, you will need a proper understanding of the different types of motherboards.

AT Motherboard

AT motherboards have dimensions of a few hundred millimeters so they are not recommended for a mini desktop because they are not suitable. Large dimensions there also make it difficult to install new drivers. This type of motherboard uses sockets and six-pin plugs that act as electrical connectors.

Power authors are considered difficult to discern and therefore they are very proving to people to connect properly and use them. Produced in the 1980s these motherboard types lasted quite a long time.

ATX Motherboard

These motherboards also known as Advanced Technology were produced in the 1990s by Intel and are considered a huge improvement over the AT motherboard.

They allow replacement when it comes to connected parts and are smaller in size compared to AT types of motherboard in a computer. The system of connectors has also been greatly improved.

LPX Motherboard

These motherboards differ from the previous boards in that they contain output and input ports on the back. A riser card was also introduced to ensure that the placement of additional slots was opened and made easier. Later AT boards adopted several features from LPX motherboards.

However, low-quality LPX motherboards lack AGP slots and instead connect directly to PCI. The list of many tasteless aspects of the LPX types of motherboard features led to the creation of the NLX.

BTX Motherboard

Extended motherboards of balanced technology were created to cope with the changing technologies that required a lot of power and produced a lot of heat. Intel however canceled further development of BTX motherboards in late 2006 so that it could focus on lower-power processors.

Pico BTX Motherboard

The term "pico" is used due to the small size of these motherboards. They support a maximum of two expansion slots although they share a common top half similar to the BTX line. Pico BTX software designed specifically for razor or half-height card applications is considered a digital line.

Mini ITX Motherboard

It is a low-power motherboard with dimensions of 17 * 17 cm. A list of Mini TX types of motherboard features in the computer was designed in 2001 by VIA Technologies. In general, they are used in SFF computer systems because they have low power consumption and cool down very quickly.

They are therefore widely preferred when it comes to home theater systems where fan noise can reduce system quality.

Post a Comment